Features
● Power supply: AC100V
-240V
● Frequency: 50
-60Hz
● Power consumption:
162W
● Light source:
9pcs 18W high brightness RGBWA+UV 6in1 LED
● Lamp life: 6
-10 ten thousand hrs
● LED angle: 30(±5) degree
● Color: 16.7 million kinds of color change
● Control channel
s:
6/8/10 Ch
● Battery power & wireless DMX
&WIFI
●Wireless DMX
-512 protocol
●Built in 2.4G receiver/ transmitter for wireless DMX operations
● Control mode: DMX512, master/slave, auto, sound active, IR remote
and
Wifi control
● Automatic model(by function
button) : color change, color strobe, color
dimmer, color gradual change/color jump change
● Operation menu: 4 digit digital LED display
●
Waterproof Rating: IP65
● Packing size:
310*310*300mm
● N.W:
6.5kg
● G.W:
7 kg
Safety Precautions
● To reduce the ri
sk of electrical shock or fire, do not expose this unit
under
the water
.
● Do not spill water or other liquids into or on to your unit.
● Be sure that the local power outlet match that of the required voltage for
your unit.
● Do not attempt to operate t
his unit if the power cord has been frayed or
broken. Do not attempt to remove or break off the ground prong from the
electrical cord. This prong is used to reduce the risk of electrical shock and
fire in case of an internal short.
● Disconnect from main
power before making any type of connection.
● Do not remove the cover under any conditions. There are no user
serviceable parts inside.
● Never operate this unit when it‟
s cover is removed.
● Never plug
this unit in to a dimmer pack.
● Always be sure t
o mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
● Do not attempt to operate this unit, if it becomes damaged.
● During long periods of non
-use, disconnect the unit
‟
s main power.
● Al
ways mount this unit in safe and stable matter.
● Power
-supply cords should be routed so that they are not likely to be
2
Remote Control
If you want use remote control to do master-slave function, you should be only one light do
master light and turn on IR, other slave light should be turn off IR.
Wifi Control
：
1.Use phone scanning this qr-code or search LED WIFI on App store to
download and install APP.
2.When you install APP, You can use phone to search the WIFI, It will be show
WIFI name
LED***.
3.Connect this WIFI name and keep it connected
4.Open LED WIFI APP to control the light.
Tip for the battery and charge
●
The battery can last for
3-4
hours when all LEDs on after full charge , and can
last for more than
10-12
hours on auto running mode. Up to
20 Hours
with one
color diode on. Results will vary based on brightness of LEDs
●
It is suggested to charge the battery for at least 6 hours, which will extend the
life span of the battery.
7
