6
DMX Terminator:
In the Controller mode, at the last fixture in the chain, the DMX output has to be connected with a
DMX terminator. This prevents electrical noise from disturbing and corrupting the DMX control signals.
The DMX terminator is simply an XLR connector with a 120Ω (ohm) resistor connected across pins
2 and 3, which is then plugged into the output socket on the last projector in the chain. The
connections are illustrated below.
Function Set:
Menu
down
up
Enter
Use button switch and LED display, can set the address code and function code easily.
Check or modify lighting function settings, Press the
MENU
button. LED display panel will display function menu
of lighting. Function operation menu all have corresponding submenu. Each menu all represent the specific
functions of lamps, specific see below "operation menu" section.
Set or browse function setting of lamp, Press
UP
or
DOWN
button.
Press
ENTER
button to save your changes or to
ENTER
submenu, Press
UP
or
DOWN
can change value (Plus or
reduce number).
According to the
ENTER
key to return to the last menu.
Menu Function Description
：
No.
Display
Function description
1
A001
6 Channel Address Code
（
001
—
512
）
Down and up button plus or reduce address code value
2
H001
29 Channel Address Code
（
001
—
512
）
Down and up button plus or reduce address code value
3
CC00
Colorful jump
（
01
—
99
）
Down and up button change jump speed
4
CP00
Colorful fade
（
01
—
99
）
Down and up button change fade speed
5
DE00
Colorful
Pulse
（
01
—
99
）
