4
Install The Equipment:
Use 2pcs clamp (need to purchase).Use clamp fix with light hook which in the packing box with
light, then use screw install to the bottom of lamp. Hang the fixture on the structure and fasten the
screws attached to each clamp. Make sure the light is installed reliable, and confirm the light which
you fixed is strong enough for hanging the light. Base on safety reason, please according to the
above picture using safety wire cross the light to make it strong enough again.
Warning!
1
．
Hook and clamp only use for hanging the light. Do not use clamp as a tool to move fixtures.
2
．
Don't use the handle of the moving head light to fixed or lift!
Power Code Connection:
Connect the power cord as follows:
L (live) =brown
E (earth) =yellow/green
N (neutral) =blue
Use the plug provided to connect the mains power to the projector paying attention to the voltage and
frequency marked on the panel of the projector. It is recommended that each projector be supplied
separately so that they may be individually switched on and off.
★
It is essential that each projector is correctly earthed and the electrical installation conforms
to all relevant standards.
