EDC Rotary™ Flashlight User’s Guide
Copyright 2018 by HDS Systems, Inc.
All rights reserved.
Basic Operation
Clicking the button (a quick press and release of the button)
will turn on your flashlight. Clicking the button a second time will
turn off your flashlight.
While your flashlight is on, you can press-and-hold the button
to momentarily activate Maximum – releasing the button returns
to the previous brightness level. You can also click-press-
hold-release to activate Maximum and stay on Maximum.
There is no delay between the click and the press.
You can select the Maximum setting directly from off by
performing a click-press-hold-release. There is no delay
between the click and the press.
Your light turns on to the brightness level selected by the rotary
control.
Rotary
Adjustable
Brightness
Level
Use the rotary control to select any brightness level between
0.02 lumens and Maximum.
The Brightness menu may be used to enable two additional
presets accessible through double-click and triple-click.
Low Battery Indication
Your flashlight will turn off momentarily and then back on one
level below the previous brightness level when the battery is
unable to supply enough power to run the current brightness
level. This process is repeated as needed as the battery’s
power is depleted.
Your flashlight will double-blink once every two minutes to
remind you that the battery needs to be changed when the
battery is no longer capable of maintaining a 50 lumen output
level and you are asking for an output level higher than the
battery can maintain.
Your flashlight restricts the output to the highest brightness level
the battery can maintain. However, if you turn off your flashlight
and turn it back on again to a higher level, your flashlight will
slowly step up through the brightness levels testing the battery
again.
Button Lockout
You can disable the switch by unscrewing the battery
compartment from the head one half turn. The O-ring will
remain completely covered. You restore operation of the switch
by screwing the battery compartment completely into the head.
You can also enable the Button Lockout option. When enabled,
triple-click from off locks and unlocks the button.
