Mizuho MOT-VS500DK, Operator'S Manual

Page: 42 / 62

38
4
Operation
4.14 Adjusting the head plate
The head plate can be bent in 15° increments, to 4 different positions upward (maximum 60°) and to 6
different positions downward (maximum 90°). The head plate can also be detached.
„ „
Bending the head plate
WARNING
• Make sure to tighten the head plate fixing handle securely.
If the head plate moves with the handles in a
loosened state, the patient may get injured.
• The head plate weighs 7 kg (15.5lbs).
Pay special attention when handling it.
It may drop and cause damage or injury.
1.
Pull the head plate flexing lever in the head direction.
The head plate can be bent upward and downward. When
release the lever, the head plate is fixed in that position.
Head plate
flexing lever
„ „
Detaching the head plate
WARNING
The head plate weighs 7 kg (15.5lbs).
Pay special attention when handling it.
It may drop and cause damage or injury.
1.
Loosen the two head plate fixing handles located on the
lower side of the back plate.
2.
Hold the both sides of the head plate firmly and pull straight.
Head plate fixing handle
Back plate
Head plate