Mizuho MOT-VS500DK, Operator'S Manual

Page: 32 / 62

28
4
Operation
4.7 Trendelenburg
WARNING
When you operate the Trendelenburg operation with a patient on the operating table,
make sure to use the fixture for the accessory of the Mizuho operating table.
The patient may fall from the operating table.
CAUTION
• When performing the head down operation, be careful
that the head plate tip does not contact the floor. It
may get damaged.
• When performing the head down operation, be careful
that the head plate fixing handle does not contact the
base. It may get damaged.
Head plate
fixing handle
„ „
Reverse Trendelenburg (Head up)
1.
Hold down and press .
The tabletop moves to the head up position.
Head up position
NOTE
• The maximum angle of
head up is 30° from the
level position.
30
°
30
°
• When Trendelenburg is
operated in the opposite
direction from the current
Trendelenburg position,
it will stop in the level
position. Once it stops,
release the switch and
press it once again; it will
be tilted to the maximum
angle.