Miyachi IPB-5000A, Operation Manual

Page: 21 / 119

IPB-5000A
6. Discription of Display Screens
6-1
6. Description of Display Screens
(1) Operation Flow
An example of the operation for the use of Welding Power Supply is shown as
follows:
1. Start up IPB-5000A
2. Press MENU Key in the front panel to display MENU Screen
3. Move the cursor
( )
to SCHEDULE Key in MENU Screen and press ENTER
Key to display SCHEDULE Screen
4. Set each value of the followings
( SCH # , TIME , UP SLOPE , DOWN SLOPE , WE1 , WE2 , TR # )
5. Supply the current for welding (e.g. close Pin No.5 at External Interface in
8.(1)
①
)
6. Display monitored CURR , VOLT , POWER and RESIST for verifying weld (See
(4)MONITOR Screen )
7. Selection of Several Functions
Set the upper and
lower limit of
CURR ,
VOLT , POWER and
RESIST for judging
Good or No Good of
weld
(See
(5) COMPARATOR
Screen
)
Set Envelope
Waveform for
judging Good or
No Good of weld
(See
(6) ENVELOPE
Screen
)
Set Weld Time
and Control
Voltage for
Precheck Current
Supply
(See
(7) PRECHECK
Screen
)
Set Weld Stop
Function.
Set Displacement
Check Function.
(See
(8) CONTROL
Screen
)
8. Supply the current for welding
9. Stop IPB-5000A