Mitutoyo DP-1VA LOGGER, User Manual

Page: 79 / 99

63
5 Function Settings
No. 99MAM029A
5.2
Various Parameter Settings and Setting
Items
Parameter setting is the function to set and customize the operation of the product. They
shall be set according to the purpose of use.
As explained in
"5.1 Various SYSTEM/WORK MODE and Print Contents/Output to
PC" on page 61, enter the "PARAMETER SETUP MODE" by pressing
DATA
press
POWER
, and after releasing the
POWER
key release
DATA
with the power turned off.
POWER
TOL.
REC/STOP
PRINTER CLEAR
STAT.
OUT LOG
CANCEL
DATA
FEED
Setting change
Setting determination and moving
to the next parameter.
In the parameter setup mode, the parameters are fi xed when all parameters are set
changing them with the operation of
DATA
and
STAT.
OUT LOG
. The changed contents are not
saved if the power is turned off during operation.
Tips
• The key operations differ in parameter setting for DATE and TIME.
For further details on the key operation for setting the date and time, refer to "2.1.4
Date and Time Setting" on page 12.
• For further details on the operation to return the parameters to the initial setting, refer
to "3.6.4 Return to the Initial Settings" on page 48.

Parameters list
♦: Initial setting values
Setting
order
Setting items Setting/print contents
1 PARAMETER CLEAR PARAMETER CLEAR: Clear the parameter,
PARAMETER NO CLEAR: Not clear the parameter ♦
2 SYSTEM MODE DP-1: DP-1 mode ♦, MP: MP mode
3 WORK MODE MODE0, MODE1 ♦, MODE2, MODE3
4 BAUD RATE (RS-232C
communication speed)
1,200, 2,400, 4,800 ♦, 9,600, 19,200
5 PARITY (RS-232C com-
munication parity check
method)
NON: no setting, EVEN: even number ♦, ODD: odd num-
ber
6 DATA LENGTH (data
length of RS-232C com-
munication)
7 ♦, 8
7 PRINT SIZE
(print character font size)
NORMAL ♦, LARGE
(only NORMAL in case MODE2 is selected)