24
2 Basic Operations
No. 99MAM029A
2.4
Printing the Statistical Calculation Value
Following the operation explained in
"2.3.2 Measurement and Display/Printing the Tolerance
Judgment Results" on page 22, the operation to print the statistical calculation value and his-
togram based on the input data (a distribution chart of the measurement data) is explained here.
Tips
When the power is turned off, the measurement data is deleted. In case the power is turned off, the
operation below shall be performed after performing the measurement value input operation again.
1
Print the statistical calculation result.
1
Press
STAT.
OUT LOG
.
» The statistical calculation result is printed.
Statistical calculation
value
(Refer to the next
page for the expla-
nation on statistical
calculation value)
Histogram
(only when the
tolerance is set)
Lower specifi cation
limit value
Upper specifi cation
limit value
Tolerance
The value range of
the symbols used
in the histogram
Tips
•
The maximum number of data that can be handled with MODE1 is 9,999. Once 9,999
measurement data are input, the statistical calculation result is automatically printed.
• If "TIME PRINT" of the parameter is set to "OFF", the date and time are not printed.
2
Turn off the power once the measurement value input and statistical calculation result
printing are completed.
1
Hold down
POWER
.
Tips
On/Off operation of the power shall be performed at an interval of 5 seconds or more.
POWER
TOL.
REC/STOP
PRINTER
CLEAR
STAT.
OUT LOG
CANCEL
DATA
FEED
Summary of Contents for DP-1VA LOGGER
