34
Voice Memo
The Eclipse mobile lets you to record one or several memos of up to 120 seconds
total. Each memo is a part of this stock of time, and may be of any duration, pro-
vided the global limit cannot exceed this limit of 120 seconds.
To record a voice memo or a phone conversation,
To listen to the voice memo,
To erase a memo,
WAP™
Either your phone is pre-programmed with the settings or you must enter them.
See below to enter the settings. If you cannot access the settings, they are pre-pro-
grammed.
Storing/editing the connection settings
(obtainable from your network operator or any WAP™ portal)
To create a new profile (up to 10 profiles can be stored):
Press and hold
.
A beep will sound and the display will show the recording time left.
The recording will then start.
A second beep will sound if the end of the recording time has
been reached.
Press
Stop
or
to end the recording.
If the memory is nearly full when starting a new recording you are asked to erase the previously
recorded voice memo.
Select Yes to do so and proceed as for point 2 in the previous item.
Select No if you do not wish to delete the previously recorded memo.
When dealing with a phone conversation you can only record one person at a time.
Press
to play what has been recorded. The display will show
the remaining recorded time.
A beep will sound at the end of the memo.
Press
Stop
or
to return to the standby display.
You can stop the memo playback at any time by pressing Stop.
Press
Erase
during memo playback or recording.
Select
Yes
to confirm your choice. Confirmation will be displayed.
Press
Exit
to return to the standby display.
Press
.
Select
Internet
.
Select
Profile list
. Choose an empty profile (
[...]
) and select
New
.
Edit a profile name then press
OK
to validate.
Stored
will
appear. After a while, the menu associated with the new profile
name is displayed.
Select
Gateway settings
, and edit an
IP address
(mandatory)
1
2
3
4
1
2
4
1
2
3
1
2
3
4
Summary of Contents for TRIUM ECLIPSE
Page 108: ...68...
