3-44
Installing the solenoid valve set
3Installing the option devices
3 Installing the option devices
3.1 Installing the solenoid valve set
Fig.3-1 : Solenoid valve installation procedures
1
2
3
4
5
6
7
8
(オプションのハンド
チューブを接続)
ハンド出力ケーブル(GR1、GR2)
グロメット
No.2アームカバー
ハンド出力
ケーブル
電磁弁セット側
ロボット本体側
電磁弁へ
No.2アーム内で接続
(GR1,GR2)
(切込を入れ
ケーブルを通す)
<3> No2 Arm cover (bottom)
<1> Solenoid
valve set
<8> RETURN coupling
<9> AIR OUT coupling
<2> Grommet (3 place)
Make a cut either one grommet.
<10>
<11>
<7> P port (Elbow type)
<6> R port (Elbow type)
<4> Hand output cable
GR2
<5> Hand output cable
(Robot arm side)
A port
B port
<4> Hand output cable
GR1
Primary piping air hose
(φ6 x 2)
Secondary piping air coupling (φ4 x 4)
Secondary piping air hose (Customer preparation)
Customer preparation hose (φ4 x 4)
Hand output signal connector
Secondary piping
air coupling
(φ4 x 4)
Connect the hand
tube optional.
Secondary piping
air hose
Customer
preparation hose
(φ4 x 4)
Primary piping air hose (Customer preparation)
Customer preparation hose (φ6 x 2)
Hand output
cable
Connect within No.2 arm.
(GR1, GR2)
No.2 arm cover
Grommet
(Make a cut and
pass the cable)
To solenoid valve
Robot arm side
Solenoid valv set side
10mm
Solenoid valve set installation position
2-M5 Screw (for fixing)
<13> Arm coverA(2)