Mitsubishi MELFA SQ Series, Standard Specifications Manual

Page: 72 / 138

3-61 Additional Axis Function
3 Controller
3.7 Additional Axis Function
This controller is equipped with an additional axis interface for controlling an additional axis when a traveling axis
or rotary table is added to the robot. A maximum of eight axes of servo motors can be controlled at the same time
by connecting a general-purpose servo amplifier (MR-J3-B series) that supports Mitsubishi's SSC Net Ⅲ .
Refer to the separate "Additional axis interface Instruction Manual" for details on the additional axis function.
3.7.1 Wiring of the Additional Axis Interface
Table 3-8 shows the connectors for additional axes inside the controller and shows a connection example (con
-
figuration example). The magnet contactor control connector for additional axes, AXMC1, is designed to accom
-
modate circuit connection with improved safety in Mitsubishi's industrial robot systems connecting additional
axes.
Please implement the appropriate circuit connection by refer to Page 63, "3.8 Magnet contactor control connec
-
tor output (AXMC) for addition axes" .
Table 3-8 ： Dedicated Connectors inside the Controller
Name Connector name Details
Connector for additional axes CN2
Note1)
Note1) Since the CN1 connector is used for the robot arms, it cannot be used for the addition axis.
The connector for connecting robot CPU with general-purpose servo
amplifier.
Magnet contactor control connector
for additional axes
EMGOUT This contact output is used to turn ON/OFF the motor power by
connecting to general-purpose servo amplifiers.