Mitsubishi Lancer Sportback, Owner'S Manual, Page: 51 / 433

To lock and unlock the doors and rear hatch
E00311500038
Using the central door lock switch
1- Lock
2- Unlock
All doors can be locked or unlocked by pressing
the central door lock switch on the driver’s door.
Type 2 (Except for vehicles equipped
with the central door lock switch)
E00311600039
NOTE
l Each of the doors can be locked or unlocked
independently by using the inside lock knob
(except for the driver’s door).
l Repeated continuous operation between lock
and unlock could activate the central door
locking systems built-in protection circuit
and prevent the system from operating. If
this occurs, wait about 1 minute before oper-
ating the inside lock knob or the key.
To lock and unlock the doors and rear hatch
E00311700030
Using the key on the driver’s door
Using the key on the driver’s door locks or unlocks
all doors and rear hatch.
1- Lock
2- Unlock
Using the inside lock knob on the driver’s door
Using the inside lock knob on the driver’s door
locks or unlocks all doors and rear hatch.
1- Lock
2- Unlock
To unlock the doors and rear hatch
E00311800217
You can select the function to unlock the doors
and rear hatch either using the ignition switch po-
sition or using the selector lever position (CVT)
or the gearshift lever position (Twin Clutch SST).
These functions are not activated when the vehi-
cle is shipped from the factory. To activate or de-
activate these functions, please contact a
MITSUBISHI MOTORS Authorized Service
Point.
Using the ignition switch position
All doors and rear hatch will unlock whenever the
ignition switch is turned to the “LOCK” position.
Using the selector lever position (CVT) or the gear-
shift lever (Twin Clutch SST) position
All doors and rear hatch will unlock whenever the
selector lever (CVT) or the gearshift lever (Twin
Clutch SST) is moved to the “P” (PARK) position
with the ignition switch in the “ON” position.
Vehicles with CVT Vehicles with
Twin Clutch SST
Locking and unlocking
1-28
1
OG4E12E1