Mitsubishi Lancer Sportback Owner'S Manual Download Page 304

Page: 304 / 433

To pair

To pair a Bluetooth

device with the Bluetooth

2.0 interface, follow the steps below.

1. Stop your vehicle in a safe area, put the gear-

shift lever (M/T) in the “N” (Neutral) posi-
tion, or the selector lever (CVT) or gearshift
lever (Twin Clutch SST) in the “P” (PARK)
position, and pull the parking brake lever.

NOTE

You cannot pair Bluetooth

devices with the

Bluetooth

2.0 interface unless the vehicle is

parked. Before pairing a Bluetooth

device

with the Bluetooth

2.0 interface, confirm

that the vehicle is parked in a safe location.

2. Press the SPEECH button.
3. Say “Setup”.
4. Say “Pairing options.”
5. The voice guide will say “Select one of the

following: pair, edit, delete, or list.” Say
“Pair.”

NOTE

If  7  devices  have  already  been  paired,  the
voice  guide  will  say  “Maximum  devices
paired” and then the system will end the pair-
ing process. To register a new device, delete
one device and then repeat the pairing proc-
ess.  (Refer  to  “Deleting  a  device”  on  page
5-77.)

6. The voice guide will say “Please say a 4-dig-

it pairing code.” Say a 4-digit number.
When the confirmation function is on, the sys-
tem will confirm whether the number said is
acceptable. Answer “Yes.”

Answer “No” to return to pairing code selec-
tion.

NOTE

Some Bluetooth

devices require a specific

pairing code. Please refer to the device man-
ual for pairing code requirements.

The pairing code entered here is only used
for the Bluetooth

connection certification.

It is any 4-digit number the user would like
to select.
Remember the pairing code as it needs to be
keyed into the Bluetooth

device later in the

pairing process.
Depending on the connection settings of the
Bluetooth

device, this code may have to be

entered each time you connect the Blue-
tooth

device to the Bluetooth

2.0 inter-

face. For the default connection settings, re-
fer to the instructions for the device.

7. The voice guide will say “Start pairing proce-

dure on the device. See the device manual
for instructions.” Enter in the Bluetooth

de-

vice the 4-digit number you have registered
in Step 6.

NOTE

According to the corresponding device to
Bluetooth

, it might take a few minutes to

pair the Bluetooth

device with the Blue-

tooth

2.0 interface.

If the Bluetooth

2.0 interface cannot recog-

nize the Bluetooth

device, the voice guide

will say “Pairing has timed out” and the pair-
ing process will be cancelled.
Confirm that the device you are pairing sup-
ports Bluetooth

, and try pairing it again.

If you enter the wrong number, the voice
guide will say “Pairing failed” and the pair-
ing process will be cancelled.
Confirm the number is right, and try pairing
it again.

8. The voice guide will say “Please say the

name of the device after the beep.” You can
assign a desired name for the Bluetooth

de-

vice and register it as a device tag. Say the
name you want to register after the beep.

NOTE

When  the  confirmation  function  is  on,  after
repeating  the  device  tag  you  have  said,  the
voice  guide  will  ask  “Is  this  correct?”  An-
swer “Yes.”
To  change  the  device  tag,  answer  “No”  and
then say the device tag again.

9. The voice guide will say “Pairing complete,”

after which a beep will be played and the pair-
ing process will end.

Selecting a device

E00760700074

If multiple paired Bluetooth

devices are available

in the vehicle, the cellular phone or music player
most recently connected is automatically connected
to the Bluetooth

2.0 interface.

For pleasant driving

5-77

OG4E12E1