Mitsubishi Lancer Sportback, Owner'S Manual, Page: 107 / 433

Odometer/Tripmeter
E00521201604
Each time you lightly press the multi-information
meter switch, the display screen switches.
Odometer/Tripmeter
→ Odometer/Tripmeter
→ Service reminder → Redisplay of a warning
display screen → Odometer/Tripmeter
Odometer
The odometer indicates the distance travelled.
Tripmeter
The tripmeter indicates the distance travelled be-
tween two points.
Example usage of tripmeter
and tripmeter
It is possible to measure two currently travel-
led distances, from home using tripmeter
and from a particular point on the way using
tripmeter
.
To reset the tripmeter
To return the display to 0, hold down the multi-in-
formation meter switch for about 2 seconds or
more. Only the currently displayed value will be re-
set.
Example
If tripmeter is displayed, only tripmeter
will be reset.
Type 1
Type 2
NOTE
l If there is no warning display, the switching
sequence is: Odometer/Tripmeter
→ Od-
ometer/Tripmeter → Service reminder
→ Odometer/Tripmeter .
l
Both tripmeters and can count up to
9999.9 km (9999.9 miles).
When a tripmeter goes past 9999.9 km
(9999.9 miles), it returns to 0.0 km
(0.0 miles).
l When disconnecting the battery terminal, the
memories of tripmeter display
and dis-
play are erased, and their displays return
to 0.0 km (0.0 miles).
Type 2
Type 1
Service reminder
E00521301168
This displays the distance and number of
months until the next periodic inspection.
Refer to “Service reminder” on page
3-16.
Interrupt display screen (when the ig-
nition switch is “OFF”)
E00520500674
When there is information to be announced, such
as lamp reminders, the buzzer sounds and the multi-
information display switches to the warning dis-
play screen. Refer to the appropriate page and take
the necessary measures.
When the cause of the warning display is elimina-
ted, the warning display goes out automatically.
Instruments and controls
3-08
3
OG4E12E1