Mitsubishi Lancer Evolution IV, Workshop Manual

Page: 36 / 391

ENGINE –
Engine Assembly
11-32
ENGINE ASSEMBLY
REMOVAL AND INSTALLATION
Pre-removal Operation
(1) Fuel Discharge Prevention
(2) Hood Removal
(3) Strut Tower Bar Removal
(4) Air Hose C Removal
(Refer to GROUP 15 – Intercooler.)
(5) Radiator Assembly Removal (Refer to GROUP 14.)
(6) Under Cover Removal
(7) Front Exhaust Pipe Removal (Refer to GROUP 15.)
Post-installation Operation
(1) Front Exhaust Pipe Installation
(Refer to GROUP 15.)
(2) Under Cover Installation
(3) Radiator Assembly Installation
(Refer to GROUP 14.)
(4) Accelerator Cable Adjustment
(5) Air Hose C Installation
(Refer to GROUP 15 – Intercooler.)
(6) Strut Tower Bar Installation
(7) Hood Installation
O-ring
Delivery pipe
1
2
3
4
5
6
7
8
9
10
11
18
12
Engine oil
5 {0.5}
Unit: Nm {kgf
@
m}
10 – 12
{1.0 – 1.2}
17
16
14
13
10 – 12
{1.0 – 1.2}
15
3 {0.3}
17
8
Removal steps
1. Center cover
2. Accelerator cable
3. Brake booster vacuum hose
connection
4. Vacuum hose connection
5. Throttle position sensor connector
6. Idle speed control motor connector
7. Heater hose connection
8. Ignition coil connector
9. Crank angle sensor connector
10. Oxygen sensor connector
11. Injector connector
12. Cam position sensor connector
13. Coolant temperature sensor con-
nector
14. Coolant temperature gauge unit
connector
15. Vacuum pipe/hose assembly
16. Control harness
"
C
A
17. High-pressure fuel hose connection
18. Fuel return hose connection