Mitsubishi 13J851, User Manual

Page: 131 / 270

118
1430
The error of host CPU is detected in the
Multiple CPU high speed bus.
Reset the CPU module and RUN it
again. If the same error is displayed
again, the CPU module has hardware
failure. (Contact your local Mitsubishi
representative, explaining a detailed
description of the problem.)
QnU
*10
1431
The communication error with other
CPU is detected in the Multiple CPU
high speed bus.
• Take noise reduction measures.
• Check the main base unit mounting
status of the CPU module.
• Reset the CPU module and RUN it
again. If the same error is displayed
again, the CPU module has hardware
failure. (Contact your local Mitsubishi
representative, explaining a detailed
description of the problem.)
1432
The communication time out with other
CPU is detected in the Multiple CPU
high speed bus.
Reset the CPU module and RUN it
again. If the same error is displayed
again, the CPU module has hardware
failure. (Contact your local Mitsubishi
representative, explaining a detailed
description of the problem.)
1433
The communication error with other
CPU is detected in the Multiple CPU
high speed bus.
• Take noise reduction measures.
• Check the main base unit mounting
status of the CPU module.
• Reset the CPU module and RUN it
again. If the same error is displayed
again, the CPU module has hardware
failure. (Contact your local Mitsubishi
representative, explaining a detailed
description of the problem.)
1434
1435
Error
Code
(SD0)
Error Contents and Cause Corrective Action
Corresponding
CPU
*4 Function version is B or later.
*5 Function version is A.
*6 The module whose first 5 digits of serial No. is 04101 or later.
*7 The module whose first 5 digits of serial No. is 07032 or later.
*8 The module whose first 5 digits of serial No. is 08032 or later.
*9 The module whose first 5 digits of serial No. is 09012 or later.
*10 The Universal model QCPU except the Q02UCPU.