Tyre repair kit
8-10
For emergencies
8
8. Shake the tyre sealant bottle well.
9. Take the cap (G) off the tyre sealant bottle
(H). Do not remove the seal (I). Screw the
filler hose (J) onto the bottle (H). As you
screw the filler hose onto the bottle, the
seal will break, allowing the sealant to be
used.
10. Press the hose onto the valve (D). Holding
the sealant bottle upside-down, squeeze it
again and again to inject all of the sealant
into the tyre.
NOTE
In cold conditions (when the ambient tem-
perature is 0 °C or lower), thickening of the
tyre sealant can make the tyre sealant hard to
squeeze out of the bottle. Warm the bottle
inside the vehicle.
CAUTION
If you shake the bottle after screwing on the
hose, sealant may spray out of the hose.
NOTE
When injecting the sealant, position the
valve away from the bottom, i.e., away from
the point where the tyre touches the ground.
If the valve is near the point where the tyre
touches the ground, the sealant may not go
into the tyre easily.
