Engine switch
6-14
Starting and driving
6
The mirrors automatically retract or extend
when the doors and tailgate are locked or
unlocked using the keyless entry system or
the keyless operation function.
Refer to “Keyless entry system” on page 3-3.
Refer to “Keyless operation system: To oper-
ate using the keyless operation function” on
pages 3-8.
E00631801516
In order to prevent theft, the engine will not
start unless a preregistered keyless operation
key is used. (Engine immobilizer function)
If you are carrying the keyless operation key,
you can start the engine.
Retracting and extending the mir-
rors without using the mirror
retractor switch
NOTE
Functions can be modified as stated below.
Please consult an authorised MITSUBISHI
MOTORS dealer.
• Automatically extend when the driver’s
door is closed, put the operation mode in
ON.
• Automatically retract when the operation
mode is put in OFF or ACC, and the
driver’s door is then opened.
• Automatically extend when the vehicle
speed reaches 30 km/h.
• Deactivate the automatic extension func-
tion.
• The outside rear-view mirrors can be
retracted or extended by the following
operations, even if changing to the any of
above. After pressing the “LOCK” switch
to lock the doors and tailgate, if the
“LOCK” switch is pressed again twice in a
row within approximately 30 seconds, the
outside rear-view mirrors will retract. After
pressing the “UNLOCK” switch to unlock
the doors and tailgate, if the “UNLOCK”
switch is pressed again twice in a row
within approximately 30 seconds, the out-
side rear-view mirrors will extend again.
Engine switch
NOTE
CAUTION
The indicator lamp (A) will flash orange
when there is a problem or malfunction in
the keyless operation system. Never drive if
the indicator lamp on the engine switch is
flashing orange. Immediately contact your
authorised MITSUBISHI MOTORS dealer.
If the engine switch operation is not smooth
and feels like it is sticking, do not operate the
switch. Immediately contact your authorised
MITSUBISHI MOTORS dealer.
NOTE
When operating the engine switch, press the
switch all the way in. If the switch is not
fully pressed, the engine may not start or the
operation mode may not change. If the
engine switch is pressed correctly, there is no
need to hold the engine switch down.
