If you press the multi-information meter switch,
the display screen switches to the screen that was
displayed before the warning display and the “!”
mark is displayed.
A- “!” mark
NOTE
l
Warning display screens with a “ ” or “ ”
mark displayed in the upper right of the
screen can be switched. If you want to switch
the display, press the multi-information me-
ter switch as follows.
“
”
: Press lightly.
“
”
: Press for about 2 seconds or more.
Redisplay of a warning display screen
When the “!” mark is displayed, if you lightly press
the multi-information meter switch a few times, the
warning display screen you switched from is redis-
played. Refer to “Information screen (when the ig-
nition switch is “OFF”)” on page 3-05.
Door ajar warning display screen
(when the ignition switch is “OFF”)
E00520600369
If any of the doors or the trunk lid is not complete-
ly closed, this displays the open door or trunk lid.
1- Doors and trunk lid are closed
2- Doors or trunk lid are open
Information screen (when the ignition
switch is turned from “OFF” to “ON”)
E00520700474
When the ignition switch is turned to the “ON” po-
sition, the display screen switches in the following
order.
1- Screen when the ignition switch is “OFF”
2- System check screen
3- Screen when the ignition switch is “ON”
System check screen
When the ignition switch is turned to the “ON” po-
sition, the system check screen is displayed for
about 4 seconds. If there is no fault, the informa-
tion screen (when the ignition switch is “ON” ) is
displayed.
Instruments and controls
3-07
3
Summary of Contents for Lancer Evolution 2009
