−69−
1.
Tapping the [open tank information] on the [administrator
setting] menu.
2
.
If the multiple heat pump units is connected to the
remote control, the list of heat pump units (Address
No.) is displayed.
Tap the [HP unit No.] to be set.
Up to 8 units is displayed on the [Select heat pump unit]
screen. If 9 or more units are connected, the 9th and the
subsequent units are displayed by tapping Next button.
3
.
I f i t c o m mu n i c a t e s w i t h H P u n i t , t h e d e t e c t i o n
temperature of open tank temperature sensor is
displayed.
Caution The detection temperature of open tank
temperature sensor is different from the hot water discharge
temperature of HP unit.
3
.
Set the upper limit setting of HW temp by tapping
▲
▼
buttons and tap Set button.
4
.
The TOP screen is displayed, when tapping Set button
■
The HW temp can be set at 5°C intervals.
HW temp setting range: From 70 to 90°C (Factory default: 90°C)
■
If tapping Back button without tapping Set button, the setting
becomes invalid and it returns to the TOP screen.
■
How to set the open tank information
You can check the detection temperature of open tank temperature sensor.
Summary of Contents for ESA30EH2 Series
Page 2: ... 2 ...
Page 85: ... 83 MEMO ...
