−68−
1.
When tapping the [Operation lamp setting] on the
[administrator setting] menu screen, the [Operation lamp
setting] menu screen is displayed.
Usual … ON when HP unit is operating
Set1 … ON when the operation is selected by pushing the
Run/Pause button.
Note ON also during the standby and day off.
■
How to change the operation lamp setting
Timing to change the operation lamp color to green (yellow green) can be changed.
Note Timing to change the operation lamp color to red (orange) cannot be changed. (The red lamp lights
only when any error occurs.)
1.
Tapping the [Hot water storage temperature upper limit]
on the [administrator setting] menu screen.
2
.
If the multiple heat pump units is connected to the
remote control, the list of heat pump units (Address
No.) is displayed.
Tap the [HP unit No.] to be set.
Up to 8 units is displayed on the [Select heat pump unit]
screen. If 9 or more units are connected, the 9th and the
subsequent units are displayed by tapping Next button.
■
How to change the upper limit setting of HW temp
If the upper limit value of hot water storage temperature is changed, the setting range of hot
water storage temperature can be changed.
Example If you change the upper limit value to 80°C, you can set in the range of 60 – 80°C.
■
Initial setting range: 60 - 90
℃
Summary of Contents for ESA30EH2 Series
Page 2: ... 2 ...
Page 85: ... 83 MEMO ...
