- 3 -
Lead-free solder is handled in a different way from eutectic solder. See below for details.
How to distinguish circuit boards using lead-free solder from those using
eutectic solder
Circuit boards using lead-free solder
A mark of
Solder
,
Joints
,
PCA
or
LFS
(for limited marking space) is printed near the board assembly number on
the component side.
Circuit boards using eutectic solder
Circuit boards using eutectic solder are divided into two groups.
- Boards having no mark of
Solder
,
Joints
,
PCA
or
LFS
(for limited marking space) near the board assembly
number.
- Boards having a mark of
Solder
,
Joints
,
PCA
or
LFS
(for limited marking space) that is painted out by a felt-
pen near the board assembly number.
* Only when there is a limited marking space on the board,
Solder
may be indicated as
S
,
Joints
as
J
, and
PCA
as
P
.
* Circuit boards using lead-free solder and those using eutectic solder may be used together in the same product.
Instructions for resoldering
- For circuit boards using lead-free solder, use lead-free solder.
- For circuit boards using eutectic solder, use eutectic solder.
- Separate the soldering iron for lead-free solder from that for eutectic solder completely for use.
(It is prohibited to use a same soldering iron for lead-free solder and eutectic solder.)
- For lead-free solder, it is advisable to use a soldering iron of at least 40 W because lead-free solder has a melting point ap-
prox. 35°C higher than that of eutectic solder as conventionally used. For wire solder, use M705ESC made by Senju Metal
Industry Co., Ltd.
- To remove solder, you can use desoldering wires for eutectic solder as conventionally used.
PRECAUTIONS FOR RESOLDERING
Summary of Contents for XD221U
Page 7: ... 1 2 5 6 OPTICAL UNIT 8 11 14 9 7 10 3 4 12 13 EXPOSED VIEW Fig 1 1 DLP ASSY ...
Page 9: ... Optical unit 2 1 3 4 5 6 7 8 Fig 1 2 ...
Page 11: ... DISASSEMBLY 1 Unscrew the 8 screws a from the bottom cover a a ...
Page 20: ... 17 17 Remove adjuster from the bottom cover Bottom cover Adjuster ...
