9
*1) Setting range differs depending on the input signals.
•
Some commands are not executed depending on the input signal. The operational restrictions same as those
on the menu setting are applied. Refer to “Menu operation” in the User Manual for more details.
How to set the value
Use the character or ASCII code as shown below to set the value.
[Example 1]
When setting the AUTO POWER ON to ON. (Values enclosed in quotation marks are ASCII codes.):
[Example 2]
When setting the CONTRAST R of the COLOR TEMP.-USER to +10, the CONTRAST G to 0, and
the CONTRAST B to -5. (Values enclosed in quotation marks are ASCII codes.):
[Example 3]
When checking the TINT setting (when the TINT is set to +10). (Values enclosed in quotation marks
are ASCII codes.):
[Example 4]
When setting the GAMMA MODE of the COLOR ENHANCER-USER to DETAIL. (Values enclosed
in quotation marks are ASCII codes.):
LPF
LPF
4Ch 50h 46h
0 (OFF), 1 (ON)
SHUTTER(U)
SHU
53h 48h 55h
00-20
SHUTTER(L)
SHL
53h 48h 4Ch
00-20
SHUTTER(LS)
SHLS
53h 48h 4Ch 53h
00-20
SHUTTER(RS)
SHRS
53h 48h 52h 53h
00-20
Character
+
-
0
1
2
3
4
5
6
7
8
9
ASCII
‘2Bh’
‘2Dh’
‘30h’
‘31h’
‘32h’
‘33h’
‘34h’
‘35h’
‘36h’
‘37h’
‘38h’
‘39h’
Command sent from the PC, etc.
Status code returned
from the projector
Description
‘30’ ‘30’ ‘41’ ‘50’ ‘4F’ ‘4E’ ‘31’ ‘0D’
00APON1
Command for setting the AUTO
POWER ON to ON
‘30’ ‘30’ ‘41’ ‘50’ ‘4F’ ‘4E’ ‘31’ ‘0D’
00APON1
Command receipt confirmation
(Command echo back)
Command sent from the PC, etc.
Status code returned
from the projector
Description
‘30’ ‘30’ ‘50’ ‘2B’ ‘31’ ‘30’ ‘2B’ ‘30’ ‘30’ ‘2D’ ‘30’ ‘35’ ‘0D’
00P+10+00-05
Command for setting the picture
control
‘30’ ‘30’ ‘50’ ‘2B’ ‘31’ ‘30’ ‘2B’ ‘30’ ‘30’ ‘2D’ ‘30’ ‘35’ ‘0D’
00P+10+00-05
Command receipt confirmation
(Command echo back)
Command sent from the PC, etc.
Status code returned
from the projector
Description
‘30’ ‘30’ ‘53’ ‘0D’
00S
Command for checking the TINT
setting
‘30’ ‘30’ ‘53’ ‘2B’ ‘31’ ‘30’ ‘0D’
00S+10
Check result (+10)
Command sent from the PC, etc.
Status code returned
from the projector
Description
‘30’ ‘30’ ‘43’ ‘45’ ‘55’ ‘31’ ‘47’ ‘53’ ‘32’ ‘0D’
00CEU1GS2
Command for setting the picture
control
‘30’ ‘30’ ‘43’ ‘45’ ‘55’ ‘31’ ‘47’ ‘53’ ‘32’ ‘0D’
00CEU1GS2
Command receipt confirmation
(Command echo back)
ITEM
Function
Data
Character
ASCII
Summary of Contents for XD221U
Page 7: ... 1 2 5 6 OPTICAL UNIT 8 11 14 9 7 10 3 4 12 13 EXPOSED VIEW Fig 1 1 DLP ASSY ...
Page 9: ... Optical unit 2 1 3 4 5 6 7 8 Fig 1 2 ...
Page 11: ... DISASSEMBLY 1 Unscrew the 8 screws a from the bottom cover a a ...
Page 20: ... 17 17 Remove adjuster from the bottom cover Bottom cover Adjuster ...
