Mitsubishi Electric VL-250CZPVU-L-E Handbook Download

Page: 83 / 166

─ 83 ─

How to arrange the lead wires after attaching the PCB covers (LOW and UP)

[1] Put the controller cable in the corner (indicated by ).

[2] Fit the part of the thermistor (OA) lead wrapped with packing into the styrene groove (indicated by ), and

put the extra part of the lead in the corner.

[3] Fit the part of the thermistor (RA) lead wrapped with packing into the styrene groove (indicated by ).

* Fit it into the same groove as the earth lead (green).

VL-350CZPVU-L type >

VL-350CZPVU-R type >

Controller cable

Assembly precaution

Be careful not to damage the styrene when fitting the lead wires into the styrene grooves.

Thermistor (OA) lead

Thermistor (RA) lead

Thermistor (OA) lead

Thermistor (RA) lead

Summary of Contents for VL-250CZPVU-L-E







































































































































































Search results

Summary of Contents for VL-250CZPVU-L-E

Reviews:

Related manuals for VL-250CZPVU-L-E

Brands by name

Popular brands

Mitsubishi Electric VL-250CZPVU-L-E, Handbook

Search results

Summary of Contents for VL-250CZPVU-L-E

Reviews:

Related manuals for VL-250CZPVU-L-E

Brands by name

Popular brands