70
OPERATING PROCEDURE
PHOTOS
12. Removing the heat exchanger.
(1) Remove the air intake grille.
(2) Remove the beam.
(3) Remove the side panel (right and left).
(4) Disconnect the relay connector.
(5) Remove the under panel.
(6) Remove the drain pan.
(7) Unscrew the screw of the pipe cover, and remove the
pipe cover.
(8) Unscrew the screw of the pipe support, and remove the
pipe support.
(9) Unscrew the screw of the heat exchanger, and remove
the heat exchanger.
Remove the heat exchanger with care. Since this is quite
heavy, removing work should be done with more than 2
people.
w
Weight of heat exchanger : approx. 5.3kg
Photo 11
Pipe
support
Pipe cover
Heat
exchanger
Screws
Screws
OC311--3.qxp 04.5.31 1:05 PM Page 70