5
3. Before Operation
How to set the current time
• The transmission mark
B
appears each time a signal
is transmitted.
•
The indoor unit beeps to confi rm that the signal transmit-
ted from the wireless remote controller has been received
by the receiver on the indoor unit. If the indoor unit does
not beep, transmit the signal again.
1. Press the
button
1
. [CLOCK]
A
blinks.
2. Press the
button
2
to set the current time.
• Press the button to increase the current time. Press
the button to decrease the current time.
• Hold down the button to increase or decrease the time
in 10-minute increments.
3. Press the
button
3
to set the day.
• Each time the button is pressed, the day changes in
the following repeating order: Monday → Tuesday →
… Sunday → Monday → …
4. Press the
button
1
to confi rm the current time set-
tings.
• [CLOCK]
A
stops blinking and remains on, and the
current day and time are displayed.
3.2. Initial setting
A
2
3
B
1
1
2
3
Press the Reset button with an
object that has a narrow end.
Top cover
Two LR6 AA batteries
Insert the negative (–) end of
each battery fi rst. Install the
batteries in the correct direc-
tions (+, –)!
3.1. Replacing the batteries and how to set the current time
2. Press the Reset button.
Battery installation/replacement
1. Remove the top cover, insert two LR6 AA batteries, and
then install the top cover.
After battery installation/replacement, please set clock.
Without setting clock, you cannot use a part of function of remote controller.
Refer to 5. Initial Setting in the installation manual.
en
VH79A034H01_IB_IM_01en.indd 5
2021/06/01 13:12:53
007
