14
5. Special Operation
Fig. 5-2
1
D
5
6
4
3
2
E
A
Some functions cannot be operated depending on the air
conditioner.
Confi rm whether the air conditioner supports each func-
tion, and then operate the air conditioner.
<Switching to the special operation mode>
(Fig. 5-1, Fig. 5-2)
1. Press the
button
1
to stop the air conditioner.
• If the weekly timer is enabled, press the
button
2
to disable the timer. (
E
disappears.)
2. Press the
button
3
.
• The Function setting screen will be displayed and the
function No.
A
will blink.
<Transmitting the settings>
(Fig. 5-1)
• When you perform each operation,
D
on the remote
controller display blinks to indicate that the
but-
ton
4
must be pressed to transmit the settings. Point
the transmission area of the wireless remote controller
towards the receiver on the indoor unit and press the
button
4
to transmit the settings. Confi rm that the
indoor unit beeps at this time.
<Exiting the special operation mode>
(Fig. 5-1, Fig. 5-2)
1. While the operation screen for each function is displayed,
press the
button
3
or the
button
5
.
• The Function setting screen will be displayed and the
function No.
A
will blink.
2. Press the
button
3
.
• The display returns to the normal screen.
5.1. Setting the fi xed airfl ow direction
(Fig. 5-1, Fig. 5-3, Fig. 5-4)
<Setting the vertical airfl ow direction>
1. In the Function setting screen, press the button
6
and
select function No. “2”.
2. Press the
button
4
.
• The vane number
B
blinks.
3. Press the button
6
to select the vane number.
• For information about the vane numbers, refer to the
indoor unit operation manual.
4. Press the
button
4
.
• The airfl ow direction setting
C
blinks.
5. Press the button
6
to select the airfl ow direction at
which you want to fi x the vane.
Step 1
Step 2
Step 3
Step 4
Step 5
Draft reduction
No setting
(No display)
6. Press the
button
4
to transmit the settings.
Note:
Draft reduction
The airfl ow direction for this setting is more horizontal than
the airfl ow direction for the “Step 1” setting in order to re-
duce a drafty feeling. The draft reduction can be set for
only 1 vane. The setting is enabled only for the last vane
that was set.
Fig. 5-3
B
C
Fig. 5-1
en
VH79A034H01_IB_IM_01en.indd 14
2021/06/01 13:12:57
016
