EN-9
● OPERATING INSTRUCTIONS ●
EN
E
CONO COOL OPERATION
Press
during COOL mode
page 6
to start
ECONO COOL operation.
The unit performs swing operation vertically in various cycles according to the
temperature airflow.
Press
again to cancel ECONO COOL operation.
• ECONO COOL operation is also cancelled when the VANE button is
pressed.
Swing airfl ow (change of airfl ow) makes you feel cooler than station-
ary airfl ow.
The set temperature and the airfl ow direction are automatically changed
by the microprocessor. It is possible to perform cooling operation with
keeping comfort. As a result energy can be saved.
N
IGHT MODE OPERATION
Press
during operation to activate NIGHT MODE
operation.
• The operation indicator lamp dims.
• The beep sound will be disabled except that emitted when the opera-
tion is started or stopped.
• Noise level of the outdoor unit will be lower than that mentioned in
SPECIFICATIONS.
Press
again to cancel NIGHT MODE operation.
Note:
• The cooling/heating capacity may drop.
• Noise level of the outdoor unit may not change after start-up of the unit, dur-
ing the protection operation, or depending on other operating conditions.
• The fan speed of the indoor unit will not change.
•
The operation indicator lamp will be hard to be seen in a bright room.
•
Noise level of the outdoor unit will not decrease during Multi system operation.
NIGHT MODE operation changes the brightness of the operation
indicator, disables the beep sound and limits the noise level of the
outdoor unit.
JG79Y567H02_01En.indd 9
2019/08/08 19:46:52