140
OPERATING PROCEDURE
PHOTOS
1. Removing the cabinet.
1. Removing the cabinet.
(1) Remove the screws of the top panel.
(2) Remove the top panel.
(3) Remove the screw of the service panel.
(4) Remove the service panel.
(5) Remove the screws of the front panel.
14-6. MXZ-A18WV -
OUTDOOR UNIT
E1
Photo 1
2. Removing the inverter assembly
(1) Remove the top panel, service panel and front panel.
(2) Remove Indoor/outdoor connecting wire and power supply
cable.
(3) Remove the compressor connector on the compressor side.
(4) Remove the connectors for fan motor, LEV and thermistor
R.V. coil from the electronic control P.C. board.
(5) Remove the screws of the inverter assembly.
(6) Remove the inverter assembly.
Photo 3
Photo 4
Photo 2
Compressor
connector
Screws of the front panel
Screws of the top panel
Screws of the front panel
Screws of the top panel
Screws of the
front panel
Screws of the
front panel
LEV, R.V.coil
and thermistor
connectors
Fan motor
connector
Screw
of the
service
panel
Screw of the relay panel
OB307A5.qxp 03.2.19 4:15 PM Page 140