Mitsubishi Electric Mr.Slim PK36FK, Technical & Service Manual, Page: 36 / 80

(8) J5 (Model selector)
J5-2) Prouided :For models with heat pump.
Not Previded :For models without heat pump.
J5-4) This jumper is unavailable for PK-FK.
36
(3) SW2 (Address selector)
(4) SW3 (Emergency operation switch)
1 2
Normal operation
ON
OFF
1 2
For emergency cooling
ON
OFF
1 2
For emergency heating
ON
OFF
(5) SW5 (Model selector)···PK12FK only
1 2 3 4
ON
OFF
SW5-1) Power supply
SW5-2) OFF:For models with heat pump
ON:For models without heat pump
SW5-3) Not for use
SW5-4) This switch is unavailable for PKH-FKHA. Keep this switch at OFF.
(6) SW6 (Model selector)
1 2 3 4
ON
OFF
Single control Twin control Triple control
SW6-1 OFF ON(Twin NO.1) ON(Triple NO.1)
SW6-2 OFF ON(Twin NO.2) ON(Triple NO.2)
SW6-3 OFF OFF ON(Triple NO.3)
SW6-4 OFF OFF ON
(7) SW7 (Model selector)
Switch to set the output of phase-controlled indoor fan motor.
Address setting is available at any time
The initial factory setting by is based on each capacity.
Models
SW7
PK12FK PK18, 24FK
1 2 3
ON
OFF
1 2 3 4
ON
OFF
PK30,36FK
1 2 3 4
ON
OFF
ON :230V/240V
OFF:220V
) (
Used in setting the unit-address for group control.
For further information, refer to page 56.
1 2 3 4 5 6
ON
OFF
J1-7) Switch for fan speed during thermostat OFF in HEAT operation.
Provided : EXTRA LOW
Not provided : LOW
J1-8) Switch for fan speed during thermostat OFF in HEAT operation.
Provided : EXTRA LOW or LOW (set with J1-7)
Not provided : Low or HIGH (set with remote controller)
J1-9) Swtich for detecting abnormalities in the outdoor unit abnormality detection.
Provided : When an abnormality occurs, it is detected.
Not provided : Even if an abnormality occurs, it can not be detected.
J1-10) Switch for auto restart function.
Provided : This function does not work.
Not provided : This function works.
2 4
OC121--2.qxp 24/6/97 2:17 AM Page 36