
Disassembling or applying grease to the Elevating Shelves can cause it to malfunction.
3
After the 4 supports are released,
pull out the shelf.
If the supports are not released easily,
push the internal hooks inward.
2
Push up each support, one at a time,
with a strong effort. (4 supports)
(When the internal hooks are released
from the refrigerator, a “click” sound
will be heard.)
1
Move the lever completely to the right.
1
Make sure that the lever is moved completely to the right.
2
Make sure that the 4 metal stoppers are securely fitted into
the refrigerator, then lightly set the shelf into the refrigerator
and align the 4 supports with the 4 stoppers.
3
Push each of the 4 supports, one
at a time, downward from above.
(When the internal hooks catch
onto the refrigerator, a “click”
sound will be heard.)
4
Finally, move the lever to the left and right and check that
the shelf moves up and down while remaining level.
(If the shelf does not remain level, the 4 hooks are not
securely caught onto the refrigerator. Remove the shelf
and repeat steps
1
to
4
.)
1
Push up the nails at the back side
of tray (3 places) using fingers.
2
Lift up the back side of tray until the
nails at the front (3 places) and nails on
both sides (2 places) are removed.
*Lift up the tray slowly, otherwise it may fall.
3
Remove the tray with both hands.
Remove the power plug from the socket.
Wait at least 10 minutes before you replace the power plug.
The refrigerator will not operate if the plug is replaced
immediately after it is removed.
Wipe or remove and wash parts with water.
To remove oily deposits, wet a cloth with warm
water or dishwashing detergent and wipe.
(Be sure to wipe off all oily deposits. Oily
deposits can cause plastic parts to break.)
Be sure to wipe off any detergent you used.
Be sure to read all instructions and heed
precautions for chemically treated
disposable cloths you use to clean parts.
Do not use alcohol, benzene, steel
wool or alkaline-base detergents.
They will cause damage to plastic
parts (door handles, cap, cases, etc.)
and coating.
Failure to remove the plug
may result in electric shock.
Warning
Elevating Shelves
Before you start
Maintenance and Cleaning
Tray removal
Installation
Removal
Maintenance
Removing and Maintaining the Accessories
24
Summary of Contents for MR-G57N
Page 30: ...MEMO 30 ...
Page 31: ...MEMO 31 ...