Put the water tank back
to its original position.
Remove ice from the ice storage bin and
close the ice making compartment door.
Remove the water tank and close
the ice making compartment door.
Fill the water tank with water
and set it in place.
Discard all the ice and water from the ice tray
in the ice storage bin to empty the ice tray.
Remove the ice storage bin and
discard the water and ice.
Do not discard the two-layer soundproof mat.
Remove the ice storage bin and
discard the water and ice.
Do not discard the two-layer soundproof mat.
Set the ice making compartment
to .
Wash the water tank (water pump, pipe, and
light-type bacteria removing filter), water supply
pipe, ice storage bin, and soundproof mat with
water. Dry carefully and reinstall parts.
To restart the ice maker, switch the ice making
setting.
Repeat step
2 to 3 times.
Press
The display ( , , , or )
of the ice making compartment will blink
(for ).
(The ice tray will be cleaned by the water from
the water tank.)
on the control panel and
hold for about 5 seconds
(Until the buzzer emits “peep, peep” tone.).
about 1 minute
Cleaning the ice tray using water from
the water tank
When the automatic ice maker will
not be used for a long period of time
When using the setting
*Follow these instructions for transportation of the refrigerator as well.
Remove ice
Ice making
compartment
Water tank
To clean (rinse) the ice tray
Regular cleaning produces clean and delicious ice.
Regular cleaning prevents water stains, molding, etc.
Ice storage bin
Ice storage bin
Press
The display ( , , , or )
of the ice making compartment will blink
(for ).
(The water and ice will empty from the ice tray.)
After the blinking stops, the original display will return.
on the control panel and
hold for about 5 seconds
(Until the buzzer emits “peep, peep” tone.).
page
11
page
11
about 1 minute
23
Summary of Contents for MR-G57N
Page 30: ...MEMO 30 ...
Page 31: ...MEMO 31 ...
