Mitsubishi Electric MR-G57N, Operating Instructions Manual

Page: 11 / 32

repeatedly to make your
required ice maker setting blink.
The display will change at each press.
Press
page
23
Press
repeatedly Press
to display .
Press repeatedly and select “H” if you want to
make clearer ice cubes or “L” if you want to increase
crystal ice making time. The selected mode will blink.
Select this mode when you want
to make a large quantity of ice.
Select this mode when you want
to make ice quickly.
Select this mode when you want
to make crystal clear ice.
It will take more time compared to
“REG” mode (about 5 to 8 hours).
Select this mode when you do
not use ice such in winter
time.
The compartment can be used for frozen
food storage. Before using this compartment
as a freezer, clean the water supply system.
Ice making mode can be selected from 4 types.
(Regular ice making)
(Crystal ice making)
(Quick ice making)
(Stop ice making)
Display the ice making
compartment
Ends automatically
indicator goes off and then indicator goes on.
It automatically completes after operating for about 9
hours, when the ice storage bin is full of ice (about 60 to
100 pieces) or when no water is left in the water tank.
Selecting ice
making modes Quick ice
making mode
Ice making
, and
simultaneously and hold for about 3 seconds.
(Until a “beep” sound is heard)
Settings for crystal ice making time and clarity
Display
Ice making time Faster than “M”
70 to 80% of ice 80 to 90% of ice 90% or more of ice
About 5 to 8 hours Slower than “M”
Clarity (percentage
of clear area)
L M H
To improve clear ice
To increase crystal ice making time
indicator turns on and whichever
applicable, will blink.
Displays of other compartments will be extinguished
temporarily.
Blinking
Ice Making
Setting the
Ice Making Compartment
Setting at the time of installation
(purchase)
During “QCK” mode, the noise from the refrigerator will
become higher due to high speed cooling.
Short notes for users:
The ice making time differs according to the ambient
temperature and conditions of usage.
Immediately after installation, it may take more than 24 hours
to make ice even if “QCK” mode is selected.
The display will turn off after 30
seconds if no button is pressed.
Short notes for users:
The display will come on if any button
is pressed.
It is set at “M” at the time of installation (purchase)
Selecting “L,” “M” or “H” will light only .
After a while, a “beep” sound is heard and the blinking
display is left and after 2 seconds, it will stay lit and the
mode is set to the lighting display.
Display of other compartments will be reset to the previous
display.
* The above illustration is an example.
Settings may be different according to the selected mode.
11