18
5) Error history display mode
The errors occurred in the past can be observed as an error history. Use this mode when the actual problem of
the refrigerator is different from the error that was displayed at the service-call received.
Error history display mode offers two ways of display. One of the two is “history display mode,” which shows all
errors occurred in the past in numeric order of the error code; the other is “order of occurrence mode,” which
shows the newest 5 errors (at the maximum) from the newest to the older.
Error history display mode starts with “history display mode.”
Setting
With the ice compartment’s door opened, press
and
simultaneously for 3 seconds until a “beep” sound is
heard.
blinks.
With the door opened, press
and
simultaneously for 3 seconds until a “beep” sound is heard.
History error mode starts. Once this mode starts, it continues operating even if a door gets opened.
Display during error history display mode
During error history display mode, blinks and
lights up.
Display of error history information.
a) Mode display
b) Error code
Tens’
place
c) Error code
Ones’
place
“ ”
Lighting
Display during error
history display mode
Blinking
a) Mode display
Display the selected mode between “history display mode” and “order of occurrence mode.”
b) Error code tens’ place
It displays the tens’ place of error code.
It applies the same representative method as the error display of self-check.
c) Error code ones’ place
It displays the ones’ place of error code.
It applies the same representative method as the error display of self-check.
Switching over the mode
Press
to select one of the error history display modes. Each press of the button makes a “beep” sound and
switches over between “history display mode” and “order of occurrence mode.”
Compartment
Error history display mode
History display mode
Display all errors occurred in the past in numeric order of the error code
Order of occurrence mode Display the newest 5 errors (at the maximum) from the newest to the older.
Tens’ place
Ones’ place
Error code
Pre-display
3sec.
0.5
sec.
Repetition
0.5
sec.
0.5
sec.
0.5
sec.
5sec.
5sec.
5sec.
E01
E13
E31
3sec.
Pre-display
Display method
Display method of the error code is the same as self check error display. (Refer to 5-2(3)); however, all indicators used for
the display of error code light up simultaneously for 3 seconds before the first error code is displayed (“pre-display”).
e.g.) When errors occurred in the following order:
fan motor error (
E31
) communication error of operation panel (
E01
) refrigerator thermistor error (
E13
)
• Display during history display mode
Errors are displayed in numeric order.
