9
(2) Demonstration mode for shop display
Setting
Within 1 minute after power is turned on, touch
,
, and
simultaneously for 5 seconds.
When the setting is complete, 2 short beeps sound and
is lit.
Demonstration mode is not available when the temperature of freezer compartment is –7°C or lower.
Panel operation mode during demonstration mode
During the demonstration mode,
is continuously lit.
Manual mode: By touching the icons, display on the operation panel changes as it is normally operated.
Auto mode: Panel display automatically changes.
When any icon is touched, the panel operation switches to the manual mode.
When no icon is touched for 10 seconds after the operation panel turns off, it switches to the auto mode.
Release
1) Open the ice making compartment door during demonstration mode, and leave it open.
2)
Touch to light up the icons.
3)
Touch ,
, and
simultaneously for 5 seconds. In about 5 seconds, 2 short beeps sound and
is turned off.
Make sure that the room display and the temperature adjustment display on the operation panel do not light up alternately
a minute after the above 3 steps are performed.
Note: Follow the procedure above to release demonstration mode as it cannot be released by simply turning
on/off the power supply.
(3) Ice making test/Self-check
Setting
Touch
for 5 seconds.
Operation and its display
While the automatic ice making test is performed, "
", "
", and " " blink on display.
When something is faulty, the error code is indicated.
Release
The test automatically finishes in 10 minutes.
(4) Temperature adjustment for lower case (when supercool chilling is set)
Outline
The lower case in the slide cases can be set to
only when it is set to supercool chilling.
When the food is frozen, set it in the ambient temperature of 5 degrees or less.
Setting
1) Touch
to light up the icon.
2) Repeatedly touch
to light up
. (When it does not light up, supercool chilling (
) has been released.)
3) Touch
to light up
.
Release
It is almost the same as the setting procedure. Turn off the light of
in procedure 3) above.
OAH162
