Mitsubishi Electric MP-J25-PS, Technical Manual

Page: 16 / 64

- 10 -
3-7. Installation of the support bracket
Notice The slide plate (large size) is not included in this device [MP-J25-PS package]. Please prepare it
by customer or purchase optional slide plate [material: glass epoxy resin] by referencing parts list at the
end of this manual. For details, please see slide plate dimensional drawing at the end of this manual.
(1) Install the support bracket right <1> with each two of screws <7> and washer <8>. By the same way,
install the support bracket left <2> to the opposite side of machine bed.
(2) Install the adapter <4> with screw <5> and washer <6>. By the same way, install it to the opposite
side.
(3) Install the stiffening plate <3> with two screws <5> and washers <6>.
<1>: Support bracket right <2>: Support bracket left <3>: Stiffening plate <4>: Adapter
<5>: Screw (Safety socket bolt M4X8) <6>: Washer (Large washer 4)
<7>: Screw (Safety socket bolt M6X12) <8>: Washer (Small washer 6)
<1>
<2>
<3>
<8>
<6>
<4>
<6>
<5>
<5>
<7>