Mitsubishi Electric MP-J25-PS, Technical Manual

Page: 34 / 64

- 28 -
(6) By turning the hand pulley <7> stick the needle <5> tip and make a small pin hole <6> on the paper.
Note For make a small pin hole, not to stick through the needle and use fine needle.
(7) Turn the hand pulley <7> and return the needle <5> to upper position.
(8) By moving the rotating arm <8> by hand and rotate the turn table <1> about 180 degree in clockwise
or counter clockwise direction. It is not necessary to rotate 180 degree exactly.
Note To avoid machine error please rotate the
θ table slowly.
<1>: Turn table
<5>: Needle
<6>: Hole
<7>: Hand pulley
<1>: Turn table <8>: Rotating arm
<5>
<1>
<6>
<7>
<8>
<1>
180 degree