Mitsubishi Electric MJ-E14EG-S1-IT, Service Manual

Page: 7 / 39

7
6. Function
 Function List
Operation Of
f
Operating mode
Laundry Mildew guard Low High Auto Defrosting detection Tank full detection (Dehumidify) Tank full detection (Move Eye) Tank full protection Drying inside ON timer setup in progress ON timer setup complete
Blower fan OFF ON ON ON ON ON/OFF ON ON ON OFF ON/OFF OFF OFF
Compressor OFF ON ON ON ON ON/OFF OFF OFF OFF OFF OFF OFF OFF
Up-down louvre CLOSE ON ON *1 *1 *1*3 *1*4 *1 ON OFF
Top
centre
CLOSE CLOSE
Left-right louvre Centre ON ON *2 *2 *2*3 *2*4 *2 ON OFF Centre Centre Centre
LED indicator
POWER Flashing
FULL
DRYING INSIDE
LCD indicator
7-segment Current humidity display (3-second display of set humidity only when SELECTION is selected)
Operation mode Selected operating mode lamp lit Flashing Lit
MOVE EYE *4 *4 *4
TIMER Set OFF timer time display ON timer time display
Up-down swing area *1 *1, *5 *1 *1 *1
Up-down swing monitor *1
Left-right swing area *2 *2, *5 *2 *2 *2
Left-right swing monitor *2
CHILD LOOK Lit when child lock is ON
Switch
POWER
MOVE EYE *6 *6
DEHUMIDIFY *6 *6
SWING
*5 *5 *5
SWING *5 *5 *5
DRYING INSIDE
TIMER *7
CHILD LOCK
*1: Operates when ON is selected for the up-down louvre. Stops when OFF is selected.
*2: Operates when ON is selected for the left-right louvre. Stops when OFF is selected.
*3: Operates when the blower fan is running
*4: Can only operate when using MOVE EYE (LAUNDRY, MILDEW GUARD) mode.
*5: Can only operate when using DEHUMIDIFY (LOW, HIGH, AUTO) mode.
*6: Operation mode moves to “tank full protection” when the switch is pressed.
*7: Can operate as the ON timer setting
: Lit/Can operate
: Unlit/Stopped/Cannot operate
 When MOVE EYE is to be turned OFF (MOVE EYE operating mode only)
If MOVE EYE is to be turned OFF when it is in MOVE EYE operating mode, turn the power OFF and press
the MOVE EYE switch for at least 3 seconds.
Follow the same procedure to turn operations ON.

MOVE EYE is ON at the time of factory shipment.
 This dehumidi fi er remembers whether MOVE EYE is ON or OFF.
Even if the power plug is pulled out or power is turned OFF, operations start with the same setting that
was previously set.