Mitsubishi Electric melsec q00ucpu, User Manual

Page: 546 / 622

1
2
3
APPEN-
DIX
6
7
8
Appendix 1 List of Par
ameter
Numbers
APPENDICES
App - 2
(To the next page)
TableApp.1 List of parameter numbers (Continued)
Item Parameter No. Referance
Use serial communication
100E
H
Section 6.23, Section
8.1(10)
Transmission speed
Sum check
Transmission wait time
RUN write setting
Service processing setting 1013
H
Section 6.24.1, Section
8.1(2)
Latch data backup operation valid contact 1014
H
Section 6.28, Section
8.1(2)
File register 1100
H
Section 9.7, Section 8.1(3)
Comment file used in a command 1101
H
Section 8.1(3)
Initial Device value 1102
H
Section 6.25, Section
8.1(3)
File for local device 1103
H
Section 9.14.2, Section
8.1(3)
Transfer to Standard ROM at Latch data backup operation 1104
H
Section 6.28, Section
8.1(3)
File used for SP.DEVST/S.DEVLD instruction 1105
H
Section 6.29, Section
8.1(5)
Device points 2000
H
Section 9.1, Section 8.1(5)
Latch (1) start/end 2001
H
Section 3.4, 6.3, Section
8.1(3)
Latch (2) start/end 2002
H
Local device start/end 2003
H
Section 9.14.2, Section
8.1(5)
File register extended
setting
Device points
2000
H
Section 9.8, Section 8.1(5)
Latch (1) start/end
2004
H
Latch (2) start/end
2005
H
32 bit Indexing 2000
H
Section 8.1(5)
WDT (watchdog timer)
setting
WDT setting
3000
H
Section 6.16, Section
8.1(4)
Initial execution monitoring time
Section 2.3.1, Section
8.1(4)
Error check
Carry out battery check
3001
H
Section 6.17, Section
8.1(4)
Carry out fuse blown check
Verify module
Check device range at indexing
Diagnose redundant power supply system
Operating mode when
there is an error
Computation error
3002
H
Expanded command error
Fuse blown
Module verify error
Intelligent module program execution error
File access error
Memory card operation error
External power supply OFF
Constant scanning 3003
H
Section 6.2, Section 8.1(4)
Detailed setting H/W error time PLC operation mode 4004
H
Section 6.9, Section 8.1(9)