Mitsubishi Electric MELSEC-L SSCNETIII/H, User Manual

Page: 122 / 154

120
(2) System information
No. Name Description Details
Set by (Set
timing)
SD200
Status of
switch Head module
switch status
Stores the switch status of the head module.
0: RUN
1: STOP/RESET
S
(Switch change)
SD201 LED status Head-LED status
• Stores one of the following statuses for the LED of the head module in the following bit
pattern.
• 0 = Off, 1 = On, 2 = Flashing
1): REM, 2): ERR., 3) Empty, 4) L ERR., 5) Empty, 6) RUN
S
(Status change)
SD203
Operating
status
Operating status
Stores the operating status of the head module.
1) Operating status
0: RUN, 2: STOP
2) Cause of STOP
Stores the latest cause of the change in the operating status.
0: STOP switch
1: Motion controller STOP
2: Remote operation from GX Works2, etc.
4: Error
3) Empty
S
(Status change)
SD250
Loaded
maximum I/O
Loaded
maximum I/O
number
Stores the upper 2 digits of the last I/O number of the connected 1.
S
(Initial)
b15 b12b11 b8 b7 b4 b3 b0
1) 2) 4) 3) 5) 6)
to to to to
b15 b12b11 b8 b7 b4 b3 b0
1) 2) 3)
to to to to