manualshive.com logo in svg

Mitsubishi Electric MELSEC iQ-R C, Programming Manual

The Mitsubishi Electric MELSEC iQ-R C is a cutting-edge programmable logic controller (PLC) offering unparalleled performance and versatility. With its advanced features and capabilities, this PLC empowers users to fully optimize their automation systems. Enhance your understanding of the iQ-R C's programming with our comprehensive, free Programming Manual available for download at manualshive.com.

Share
Download
background image

8

1  COMMON ITEMS
1.2  C Controller Module Dedicated Functions

1.2

C Controller Module Dedicated Functions

C Controller dedicated functions of the dedicated function libraries are used to control C Controller module.
These functions can be used for reading status of C Controller module or accessing resources such as LED control and clock.

Program processing

The following shows the user program processing using the C Controller module dedicated function.

1.

Start a task.

2.

Read the status of C Controller module and access the resources such as LED control and clock by using the C 
Controller module dedicated function.

3.

Complete the task.

Considerations

Considerations for user WDT (user watchdog timer)

■

User WDT error occurrence

If a user WDT cannot be reset due to a user program runaway, a user WDT error will occur.
In this case, take the following corrective actions.
 • Increase the user WDT period set with the CCPU_StartWDT function.
 • Lower the number of tasks with high CPU utilization or make them deactivated.
 • Review the user program.
Reset the C Controller module once the corrective actions have been taken.

In the user program, a user WDT can be used to monitor the hardware and status of user program, and 
processing timeout for accessing and controlling each module.

■

User WDT setting range

The user WDT period can be set within the range of 100 ms to 10,000 ms.

■

Output when a user WDT error occurs

When a user WDT error occurs, the output turns OFF.

Considerations for the dedicated instructions

Considerations for argument are shown below:
 • For the first argument, "pcInstName", categorizing the dedicated instructions (D/DP/J/JP/G/GP/M) is not required.
 • Devices of the own station cannot be specified. Reserve the required area with a user program, and specify the start 

address of the area to the relevant argument.

 • Specify devices of other stations by using a character string. Set the value (the number of elements to which one is added 

for the termination code) to the number of elements for the array.

(Example) To specify D4: char cDev[3] = {"D4"};
Set '3', the total number of '2' for D4 and '1' for termination code, to the number of elements for the character string.
 • When the data type is device name (control data, input data, and output data), specify the argument using an array.
 • The size is required to be set according to the number of elements for the array, which is specified to the argument. When 

data type is 16-bit binary, BCD 4-digit, or real number, set the size to '1'. When data type is 32-bit binary or BCD 8-digit, set 
the size to '2'.

 • When data type is bit (completion device), specify the argument using an array. Specify '1' for completion or '0' for 

incompletion to the first array. In the second array, '0' or '1' is stored for the normal completion or abnormal completion, 
respectively.

 • For arguments without the setting data, set the setting data to NULL, and set the size to '0'.
 • Errors which occur in the dedicated instruction are not registered in the event history.

Summary of Contents for MELSEC iQ-R C

















































































































































































































Reviews:

No comments

Related manuals for MELSEC iQ-R C

PIETRO FIORENTINI DELTAFLUX MT100 Technical Manual preview
DELTAFLUX MT100
Brand: PIETRO FIORENTINI Pages: 16
Waters 2690 Quick Start Manual preview
2690
Brand: Waters Pages: 55
Paradox IP150 Programming Manual preview
IP150
Brand: Paradox Pages: 2
DayTronic 3700 Series Instruction Manual preview
3700 Series
Brand: DayTronic Pages: 22
DayTronic System 10 User Manual Book preview
System 10
Brand: DayTronic Pages: 414
VAT 620 Series Installation, Operating, & Maintenance Instructions preview
620 Series
Brand: VAT Pages: 26
SAI HVAC Compact Comfort VAV12 User Manual preview
Compact Comfort VAV12
Brand: SAI HVAC Pages: 16
saia-burgess PCD3 Series Hardware Manual preview
PCD3 Series
Brand: saia-burgess Pages: 203
Sailor N420 Technical Manual preview
N420
Brand: Sailor Pages: 1
NAiS FP2 Technical Manual preview
FP2
Brand: NAiS Pages: 144
Sunnen HTA-2000 (2M) Manual preview
HTA-2000 (2M)
Brand: Sunnen Pages: 24
DCU Tecnologic 30902020 Quick Start Manual preview
30902020
Brand: DCU Tecnologic Pages: 2
zeeltronic PDCI-NS1V User Manual preview
PDCI-NS1V
Brand: zeeltronic Pages: 15
M-system M8BS2-081 Instruction Manual preview
M8BS2-081
Brand: M-system Pages: 3
Ebyte E31-433T30S User Manual preview
E31-433T30S
Brand: Ebyte Pages: 20
Energenie EG-PWC-PSWRC-01 User Manual preview
EG-PWC-PSWRC-01
Brand: Energenie Pages: 2
Viconics ZigBee Pro VT8000 Series Installation Manual preview
ZigBee Pro VT8000 Series
Brand: Viconics Pages: 3
Taco HAFC101 Wiring Manual preview
HAFC101
Brand: Taco Pages: 104

Brands by name

Popular brands

Load more brands