manualshive.com logo in svg

Mitsubishi Electric MELSEC iQ-R C, Programming Manual

The Mitsubishi Electric MELSEC iQ-R C is a cutting-edge programmable logic controller (PLC) offering unparalleled performance and versatility. With its advanced features and capabilities, this PLC empowers users to fully optimize their automation systems. Enhance your understanding of the iQ-R C's programming with our comprehensive, free Programming Manual available for download at manualshive.com.

Share
Download
background image

1  COMMON ITEMS

1.3  MELSEC Data Link Functions

39

1

■

Network number and station number for MELSEC data link functions (the mdControl function 

and the mdTypeRead function)

Network numbers and station numbers to be specified to the mdControl function or the mdTypeRead function are as follows:

*1 Station number setting for a CC-Link IE Controller Network module, CC-Link IE Field Network module, and MELSECNET/H network 

module

*2 When '0 (0H)' or '125 (7DH)' is specified for the station number, a specified control station of the network, which is specified to the 

network number, is accessed. To access the current control station (a station that is actually operating as the control station), specify the 
station number from 1 (1H) to 120 (78H).

*3 125 (7DH) is valid when CC-Link IE Field Network master station (station number 0) is specified by using the SEND/RECV function 

(mdSendEx (message send function) or mdReceiveEX (message receive function)). To access a master operating station (a station that 
is operating as the master station when the submaster function is used), specify the station number from 1 (1H) to 120 (78H).

*4 Station number setting for CC-Link module

*5 The station number 64 cannot be specified for CC-Link communication.

In addition, when the station number of the own station is 64, other stations cannot be set. (Only the own station can be accessed.)

Communication

Station number specification method

Bus interface

Own station: 255 (FFH)
Other station: 1 (CPU No.1), 2 (CPU No.2), 3 (CPU No.3), 4 (CPU No.4)

CC-Link IE Controller Network

Own station: 255 (FFH)
Other station: 

*1,*2

CC-Link IE Field Network

Own station: 255 (FFH)
Other station: 

*1,*3

MELSECNET/H network

Own station: 255 (FFH)
Other station: 

*1,*2

CC-Link

Own station: 255 (FFH)
Other stations: 0 (0H) to 63 (3FH), 65 (41H) to 239 (EFH)

*4,*5

Upper/
lower

Setting item

Setting value

Description

Upper

Network number

1 (1H) to 239 (EFH)

Set this to specify other stations in the own network or each station on other networks.

• Set this to issue a sending request to any of CC-Link IE Field Network, CC-Link IE 

Controller Network, MELSECNET/H network, or MELSECNET/10 network.

Lower

Station number, 
Group number, or All 
stations

1 (1H) to 120 (78H)

Set the station number of other stations.

• For MELSECNET/H network, the setting range is from 1 to 64.
• For CC-Link IE Field Network, the setting range is from 0 to 120.

129 (81H) to 160 (A0H)

Set the group number 1 to 32.

• For MELSECNET/10 network mode, 129 (81H) to 137 (89H): Group number 1 to 9.
• The group number specification is valid when the SEND function (mdSendEx (message 

send function)) is used.

(Cannot be specified if CC-Link IE Field Network is used.)

240 (F0H)

Set all stations.

• Specifying all stations is enabled when the SEND function (mdSendEx (message send 

function)) is used.

Logical station number setting method

Set '0' in the upper byte (network number) of the station number above, and specify a logical station number in the lower byte (station number).
The setting range of the logical station number is 65 (41H) to 239 (EFH).
Set the logical station number with the user program (MELSEC data link functions).

Upper/
lower

Setting item

Setting value

Description

Upper

Network number

0

Set the value for CC-Link.

Lower

Station number

0 (0H) to 63 (3FH)

Set the station number of other stations.

Logical station number setting method

Set '0' in the upper byte (network number) of the station number above, and specify a logical station number in the lower byte (station number).
The setting range of the logical station number is 65 (41H) to 239 (EFH).
Set the logical station number with the user program (MELSEC data link functions).

Upper

Lower

Upper

Lower

Summary of Contents for MELSEC iQ-R C

















































































































































































































Reviews:

No comments

Related manuals for MELSEC iQ-R C

Harmonic Drive CHA Engineering Data preview
CHA
Brand: Harmonic Drive Pages: 85
Kampmann 197901960988 Manual preview
197901960988
Brand: Kampmann Pages: 5
WAGO 751-3502 Manual preview
751-3502
Brand: WAGO Pages: 16
LST Extinguishing Control Panel BC06-2EXT Brochure & Specs preview
Extinguishing Control Panel BC06-2EXT
Brand: LST Pages: 4
Quickie R-net Instructions For Use Manual preview
R-net
Brand: Quickie Pages: 108
GARDINER TECHNOLOGY GARDTEC 590 User Instructions preview
GARDTEC 590
Brand: GARDINER TECHNOLOGY Pages: 28
Hearth Products Controls RCK-I Series Installation And Operation Instructions preview
RCK-I Series
Brand: Hearth Products Controls Pages: 5
Thorlux Lighting SmartScene IR Remote Series Installation Instructions preview
SmartScene IR Remote Series
Brand: Thorlux Lighting Pages: 2
Zencontrol zc-controller Instructions preview
zc-controller
Brand: Zencontrol Pages: 2
Daikin KBRCS01A Quick Start Manual preview
KBRCS01A
Brand: Daikin Pages: 2
Advantech PCI-1760U Startup Manual preview
PCI-1760U
Brand: Advantech Pages: 3
Dataq DI-1000TC User Manual preview
DI-1000TC
Brand: Dataq Pages: 26
Anritsu NF7600 Series Operation Manual preview
NF7600 Series
Brand: Anritsu Pages: 74
Adaptec ASR-2045 Important Information About Issues And Errata preview
ASR-2045
Brand: Adaptec Pages: 4
Fronius RC Panel Pro Operating Instructions Manual preview
RC Panel Pro
Brand: Fronius Pages: 8
Valcom V-119RTHF Instruction Manual preview
V-119RTHF
Brand: Valcom Pages: 9
M-system R7C-EC8C Instruction Manual preview
R7C-EC8C
Brand: M-system Pages: 3
Genasun GVB-8-WP Series Manual preview
GVB-8-WP Series
Brand: Genasun Pages: 8

Brands by name

Popular brands

Load more brands