Mitsubishi Electric MELSEC iQ-F, Manual

Page: 4 / 58

2
1 FUNCTION BLOCK (FB) LIST
1
FUNCTION BLOCK (FB) LIST
This chapter lists the FBs for the MELSEC iQ-F series positioning module.
*1 Note that this reference does not describe the FB version information which is displayed such as "_00A" at the end of FB name.
Name
*1
Description
M+FX5PG_SetPositioningData Sets positioning data (Da.1 to Da.10, Da.27 to Da.29).
M+FX5PG_StartPositioning Starts the positioning operation.
M+FX5PG_JOG Performs the JOG operation or inching operation.
M+FX5PG_MPG Performs the manual pulse generator operation.
M+FX5PG_ChangeSpeed Changes the speed.
M+FX5PG_ChangeAccDecTime Changes the acceleration/deceleration time during speed change.
M+FX5PG_ChangePosition Changes the target position.
M+FX5PG_Restart Restarts an axis that has stopped.
M+FX5PG_OperateError Monitors errors and warnings, and resets errors.
M+FX5PG_InitializeParameter Initializes parameters.
M+FX5PG_WriteFlash Writes positioning data and block start data in the buffer memory to the flash ROM.
M+FX5PG_ABRST Restores the absolute position.
M+FX5PG_StartAddressOffsetPositioning The following axis starts after the preceding axis has started and moved the set movement amount.
M+FX5PG_SetTimeOffsetPositioning The following axis starts after the set time has elapsed from the start of the preceding axis.