32
5
Tab
Tab
Rear case
mounting
screw
Rear case
mounting
screw
Rear case
(3) Removing the Case R, Case L, and Rear Case
1
Remove the inlet panel and two pre-
filters.
→ (See “(1
) Removing the Inlet
Panel and Two Pre-filters”.)
2
Remove the HEPA filter and two
activated charcoal filters.
→ (See “(2
) Removing and
Replacing the HEPA Filter and Two
Activated Charcoal Filters”.)
3
Remove the four case R/case L
mounting screws from the front of the
main unit, peel off the screw cover
sticker in each handle of the case R
and case L, and then remove the two
case R/case L mounting screws.
4
Disengage the front joint of the case
L, and disengage the two lower
joints. Then, disengage the eight
remaining joints while opening the
case L from the front of the main unit.
Remove the joints of the case R via
the same procedure.
→ (Removing the Case R and Case
L)
5
Remove the six rear case mounting
screws from the rear of the main unit,
and then remove the rear case from
the six tabs.
→ (Removing the Rear Case)
3
3
3
Case R
Case L
Case L
mounting
screw
Case R
mounting
screw
4
Joint
(11 places in total)
Front joint (1 place)
Bottom joint (2 places)
Case L
(symmetrical
to case R)
Screw cover sticker
Screw cover sticker
Case R mounting screw
Case L mounting screw
Case L
Case L
handle
Case R
handle
3
3
3