─
16
─
3
Disconnect the connector from the sensor circuit board.
(Indicated by
)
4
Remove the sensor circuit board.
Sensor circuit board (JT-37S)
Assembly precautions
• Run the lead wires through the grooves of the blower cover.
(Indicated by
)
• Take care not to pinch the lead wires.
(3) Sensor circuit board (JT-37S)
1
Remove the front panel.
→
See (2)
1
and
2
.
2
Unhook the claw (indicated by
) of the sensor fix plate from the
nozzle, and then remove the sensor fix plate.
Sensor fix plate
Nozzle
Assembly precautions
• Run the lead wires through the groove of the nozzle. (Indicated by
)
• Take care not to pinch the lead wires.
(4) Power circuit board (JT-37PH/JT-37P)
1
Remove the front panel.
→
See (2)
1
and
2
.
2
Unscrew the screw to remove the circuit board cover.
(One PTT screw 4 x 6, indicated by
)
Circuit board cover
3
Disconnect the connectors from the power circuit board.
Power circuit board
(JT-37PH/JT-37P)
*The picture shows JT-37PH.
Blower cover
Blower lead
TAB4 TAB3
Heater lead
CN 101
Tightening torque:
1.0 ± 0.1 N.m
