135
5. PARAMETERS
5.10 Checking parameters changed from their initial values (initial value change list)
1
2
3
4
5
6
7
8
9
10
5.10
Checking parameters changed from their initial
values (initial value change list)
Parameters changed from their initial values can be displayed.
Operating procedure
1.
Turning ON the power of the converter unit
The operation panel is in the monitor mode.
2.
Selecting the parameter setting mode
Press
to choose the parameter setting mode. (The parameter number read previously appears.)
3.
Selecting the parameter number
Turn
to "
" (Initial value change list), and press
.
"
" appears.
4.
Checking the initial value change list
Turn
. The parameter numbers that have been changed from their initial value appear in order.
●
If
is pressed with parameters that have been changed, the parameter settings can be changed as they are.
(Parameter numbers are no longer displayed in the list when they are returned to their initial values.)
Other changed parameters appear by turning
.
●
"
" is returned to when the last changed parameter is displayed.
NOTE
• The initial value change list can be used also for parameter setting.
