50
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
<INITIAL SET UP/INFORMATION> (continued)
Warning will also be displayed for parts where
recorded data is damaged for some reason.
IMAGE MODIFIED( )
1 2 3
When performing complex playback operations
with the SHUTTLE ring during alteration check, the
“IMAGE MODIFIED” warning may appear. Perform
alteration check using playback or playback with
changed playback intervals.
♦
SEQUENTIAL PLAY
It is possible to make archive of the video recorded with this
unit to an analogue video recorder, etc., while playing back
the video of each camera in order using the single screen
display. During single screen sequential playback, the SPLIT/
SEQUENCE button will light. In addition, the playback order/
time of each camera will be the order of the recorded video.
#1
#1
#2
#1.Appears when “ARCHIVE•COPY” is set to
ID4•ID5 on the screen.
#2.Appears when “PARTITION” (“LONG PRE-ALARM”)
is set and “ARCHIVE•COPY” is set to ID4•ID5
respectively on the screen.
<HDD SETTINGS>
HDD REPEAT REC MAIN ON
HDD REPEAT REC SUB OFF
HDD REPEAT REC LPA OFF
HDD REPEAT PLAY OFF
IM-CHECK PLAY OFF
>>SEQUENTIAL PLAY OFF
FIFO OVERWRITE MODE OFF
ARCHIVE SOURCE HDD MAIN
ARCHIVE START POSITION RESET
Setting ( default : “OFF” )
“ON” : Plays back the video in the single screen se-
quential mode.
“OFF” : Does not play back the video in the single
screen sequential mode.
Playback is performed during camera sequential play
at an interval of 25P. To change the playback interval,
press the PLAY button (or the REV. PLAY button)(
see “Changing playback intervals, pages 69, 70).
1. Press the SET UP button
}
<SETTINGS>
}
<INITIAL SET
UP/INFORMATION>
}
Select “SEQUENTIAL PLAY” in the <HDD
SETTINGS> screen. Display the desired setting and confirm.
2. Turn the SHUTTLE ring counterclockwise or press the SET
UP button.
3. Press the PLAY button.
4. Press one of the camera number buttons with recorded video.
• Single screen sequential playback starts.
When performing camera sequential playback
for video with long recording intervals, the video of
the largest camera number selected for recording
will be played back the longest.
Only the camera number (title) of the pressed
camera number button is displayed. Other camera
number (titles) will not be displayed. If display is not
necessary, select “NONE” in the <CAMERA DIS-
PLAY> (
see page 33).
■
ARCHIVE
♦
FIFO OVERWRITE MODE
This function can be set to make repeated archive while
deleting parts of previous data in HDD for recording con-
nected to ID4.
<HDD SETTINGS>
HDD REPEAT REC MAIN ON
HDD REPEAT REC SUB OFF
HDD REPEAT REC LPA OFF
HDD REPEAT PLAY OFF
IM-CHECK PLAY OFF
SEQUENTIAL PLAY OFF
>>FIFO OVERWRITE MODE OFF
ARCHIVE SOURCE HDD MAIN
ARCHIVE START POSITION RESET
This setting is appeared when “ARCHIVE• COPY”
is selected on “ID4•ID5” of the <INITIALIZATION>
screen, and HDD for recording is connected to ID4.
Confirm that the ARCHIVE device is correctly
connected to ID4 before making FIFO OVERWRITE
MODE settings.
Settings ( default : “OFF” )
“ON” : Perform repeated archive to HDD connected
to ID4.
“OFF” : Do not perform repeated archive to HDD
connected to ID4.
1. Press the SET UP button
}
<SETTINGS>
}
<INITIAL SET
UP/INFORMATION>
}
Select “FIFO OVERWRITE MODE” in
the <HDD SETTINGS> screen.
2. Turn the SHUTTLE ring clockwise twice when the cursor is
on the left next to “FIFO OVERWRITE MODE”.
• The first turn inverts the “OFF” setting display, and the
second makes it flash with a red background.
3. Select “ON” by turning the JOG, and turn the SHUTTLE
ring clockwise.
• The setting is made, and the display stops flashing.
If a power failure occurs during archive, the ar-
chive will not restart automatically after the power is
restored. Press the ARCHIVE button to restart ar-
chive. When the timer record setting has been pre-
set, the archive will automatically restart after the
power is restored, but from the point that the unit
started archive before the power failure occurred.
♦
ARCHIVE SOURCE HDD
The ARCHIVE device can be set to archive data from the
MAIN HDD, SUB HDD or LPA HDD.