2
PRECAUTIONS
SAFETY PRECAUTIONS
In the interest of safety, please observe the following precautions:
POWER REQUIREMENT
This Digital Color Printer is designed to operate on 100 - 240 V AC 50/60 Hz. Never connect to any outlet or power supply
having a different voltage or frequency. In addition, be sure to supply power to the printer from a receptacle with a ground fault
circuit interrupter.
WARNING: THIS APPARATUS MUST BE EARTHED.
PROTECTIVE MEASURES
IF ABNORMALITIES ARISE, .....
Use of the printer during emission of smoke or abnormal
sounds (without adopting countermeasures) is dangerous.
In such a case, unplug the power cord from the source
outlet immediately, and request maintenance service from
the sales dealer.
NEVER INSERT ANY OBJECT INTO THE PRINTER
Foreign objects of any kind inserted into this printer
constitute a safety hazard and can cause extensive
damage.
DO NOT PLACE ANYTHING ON THE DIGITAL
COLOR PRINTER
Heavy objects placed on the Digital Color Printer can cause
damage or obstruct proper ventilation.
PROTECT THE POWER CORD
Damage to the power cord may cause fire or shock hazard.
When unplugging, hold by the plug only and remove
carefully.
DO NOT PLACE WATER CONTAINERS ON THE
PRINTER
Do not place flower vases, and other water-holding
containers on the printer. If, for some reason, water seeps
to the inside of the printer, unplug the power cord from the
source outlet, and contact the sales dealer. If used without
corrective measures, the printer may be damaged.
“In the interest of safety, avoid handling of liquids near the
printer.”
DO NOT REMOVE THE CABINET
Touching internal parts is dangerous, besides, it may lead
to malfunction. Contact the sales dealer to carry out internal
checks and adjustments.
UNPLUG THE POWER CORD DURING A LONG
ABSENCE
Turn off the main power switch and unplug the power cord
during a long absence.
WHEN TRANSPORTING THE PRINTER
When transporting the printer, remove the ink ribbon and
print paper from the printer. See
WHEN MOVING THE PRINTER
Check that the slide door is closed firmly. And pay attention
not to press the front release button accidentally. When the
slide door is not closed firmly or you press the front release
button accidentally, the slide door may open. It can cause
injury or damage.
BE CAREFUL AROUND PAPER EXIT SLOT
Don’t insert your hand or any material into the print output
slot and the waste output slot during printing. If you do so,
your finger will be injured.
DO NOT PUT YOUR HAND OVER THE PRINT
PAPER HOLDER
If you do so, your finger will be injured.
DO NOT TOUCH THE THERMAL HEAD EXCEPT
WHEN CLEANING
Do not touch the thermal head (located inside the top cover)
except when cleaning.
They are heated to high temperature and may cause burns
or injury when touched.
Also, malfunction caused by static electricity may occur.
WHEN PLACING THE PRINT PAPER, KEEP THE
PRINT PAPER UPRIGHT
When you put the print paper sideways on a table, etc., it
may roll and fall. This may cause injury.
CONNECTION CABLES
Use the provided power cord.
DO NOT LEAVE THE SLIDE DOOR OPEN
When the printer is moved with the slide door open, it may
cause injury or damage.
CLOSE THE SLIDE DOOR FIRMLY
Take care not to pinch your hand when closing the slide
door. When the slide door is not closed firmly, it may open
during transportation and it may cause injury or damage.
DO NOT PUSH DOWN ON THE SLIDE DOOR
If you push down on the slide door when they are open, this
printer may fall and it can cause damage or injury.
DO NOT LEAN ON THE EXIT PAPER TRAY, DO
NOT APPLY PRESSURE TO IT FROM ABOVE, OR
DO NOT PUT A HEAVY OBJECT ON IT
The exit paper tray may be damaged, causing injury.
