17
OPERA
TION
LCD Indication
Description
READY[8x12]
The printer is on and ready to make prints. [8x12] represents the size of ribbon that is loaded.
PRINTED: ******
****** represents the total number of prints made since the printer was manufactured. This counter
cannot be reset.
PAPER LEFT: ***%
***% represent the percentage of the paper that is available for making prints.
INK LEFT: ***%
***% represents the percentage of the ink ribbon that is available for making prints.
MAIN FW: ******
****** represents the version number of the printer control firmware.
FPGA: ******
****** represents the version number of the FPGA firmware.
TABLE: ******
****** represents the version number of the print parameter table.
SERIAL: ******
****** represents the serial number of the printer.
MODEL: ********
******** represents the model name of the printer.
TPH MODEL: *****
***** represents the model name of the thermal head.
TPH SN: ********
******** represents the serial number of the thermal head.
TPH RES: ****
**** represents the resistance of the thermal head.
10 LEVEL GRAY
Press the ENTER button to make a test print.
STATUS PRINT
Press the ENTER button to make a test print.
WAIT TIME: ***
Press the ENTER button to change wait time from 0 to 999 seconds. The default is 10 seconds.
The wait time is the length of time when the printer wait the next image which is be combined to the
received image.
This setting enables the printer to reduce the total printing time and consumption of the ink ribbon.
TIME OUT: ***
Press the ENTER button to change time out from 1 to 999 seconds. The default is 300 seconds.
The printer prints out only side-A image (single sided print) if side-B image isn’t sent to the printer
within the time set by TIME OUT.
CLEAR WASTE
If waste jam happens, press the ENTER button to remove jammed waste easily.
USAGE
DESCRIPTIONS OF MESSAGES SHOWN ON THE LCD
